0
Home > Products > BLE ModulesHelp?
  • Quick Purchase
  • Please enter the model No. from below Model Sheet.

      Model Sheet
  • Manufacturer
 
BLE Modules
  Model: BBT-IPX11G
Price: US $0 /piece
Quantity: Pieces
Color:
Frequency:
Total Price
Add To Wish List Contact Now
 


Item specifics


Limit Parameters

Main Parameters Performance Remarks
Min Max
Power supply(V) 0 3.8 -
Blocking power(dBm) - 10 Chance of is slim when modules are used in short distance
Operating temperature(℃) -40 +85 Industrial grade


Operating parameter

Main Parameters Performance Remarks
Min Typ Max
Operating voltage(V) 1.8 3.3 3.8 -
Communication level (V) - 3.3 - 5V TTL might burn module
Operating temperature (℃) -40 - +85 -
Operating frequency(MHz) 2400 - 2483.5 ISM band
TX Current(mA) - 178mA - 20dBm
RX current(mA) - 10.8mA - -
Sleep current(μA) - 1uA - -
Max Tx power(dBm) - 20   - -
Rx sensitivity(dBm) -88   -92 -97 Air data rate 1Mbps
Communicationspeed  GFSK(bps) - 1M   - -


Main parameter Description Remarks
Reference distance 200m(PCB)
300m(IPX)
In open and clear air, test height 2.5m,air data rate 1Mbps
Modulation GFSK GFSK Mode
Package SMD -
Connector 1.27mm -
Communication interface UART 4800~230400bps
Size 19*13mm(PCB)
16*13mm(IPX)
-
RF connector   PCB/IPX 50Ω
Weight 0.8±0.1g(PCB)
0.8±0.1g(IPX)
-




Product Description


Pin Defination

No. Function Description
1 GND Ground,connect to power reference ground
2 PWN N/A
3 PWN N/A
4 PA00 N/A
5 PA03 N/A
6 N.C -
7 N.C -
8 PA04 N/A
9 PA05 N/A
10 SWD -
11 SWC -
12 N.C -
13 NetLink Network indicator, pin outputs high level after successfully networking
14 PD04 N/A
15 PWM N/A
16 PD03 N/A
17 TXD TX pin of UART,for UART receiving
18 RXD RX pin of UART,for UART transmitting
19 VCC   Power supply 1.9~3.6V(It is recommended to add a ceramic filter capacitor externally)
20 GND Ground,connect to power reference ground
21 PC02 N/A
22 PC03 Low-power role selection pin (internal pull-up):
Low power consumption role: pull up or float;
Other roles: Go directly to the ground.
23 PC04 Reset. Except for hardware information (UART configuration), allfactory settings are restored.
24 Wakeup The wake-up pin is valid in low level under low power mode.
25 RST Chip reset trigger input pin, valid in low level
26 GND Ground,connect to power reference ground

Contact Us
Note:must be logged in to send us a message

Copyright @ 2023 Allinki Intelligent Technology (Shenzhen) Co., Ltd. All rights reserved.