Model: AW-10

WiFi Modules

Item specifics

Main parameter	Performance	Remark
Operating voltage	2.7~3.6V	≥3.6V ensures output power
Communication level	3.3V	-
Operating temperature	-40~+85℃	Industrial grade
Operating frequency	2400~2483.5MHz	Support ISM band
Max TX power	20dBm	-
Wifi version	802.11	-
Crystal frequency	26MHz	-
Reference distance	250m	Test condition：clear and open area, antenna gain: 5dBi,antenna height: 2.5m
Interface	1.5mm	-
Communication Interface	UART	-
Outter size	15*12.3mm	-
RF interface	IPEX	Equivalent impedance : 50Ω
Weight	0.9g	-

Pin No.	Item	Direction	Description
1	GND	-	GND
2	IO2	Input/Output	GPIO2; Can be used as UART1_TX when flashing
3	IO0	Input/Output	GPIO0;SPI_CS2;
4	IO4	Input/Output	GPIO4
5	IO5	Input/Output	GPIO5
6	RXD0	Input/Output	GPIO3;Can be used as UART1_TX when flashing
7	TXD0	Input/Output	GPIO1; SPI_CS1;Can be used as UART1_TX when flashing
8	RST	Input	External reset signal (low level valid), reset module; The pull-up resistor is connected to the inside of the module
9	IO16	Input/Output	GPIO16; Deep sleep wake-up
10	ADC	Input	TOUT;ADC port (Note: ADC port port inside the chip) can be used to detect the input in voltage of the VDD3P3 (Pin3, Pin4) supply voltage and the TOUT (Pin6) (both of which cannot be used at the same time)
11	EN	Input	Chip enables end, high level: effective, chip works properly;Low level: Chip closed , small current., and the pull-up resistor is connected inside the module
12	IO14	Input/Output	GPIO14; HSPI_CLK
13	IO12	Input/Output	GPIO12;HSPI_MISO
14	IO13	Input/Output	GPIO13; HSPI_MOSI; UART0_CTS
15	IO15	Input/Output	GPIO15; HSPI_CS；UART0_RTS; Resistance is connected to ground in the inside of the module
16	VCC	-	Module power：2.7~3.3V